TruLaser Tube 5000

This laser machine produced in 2008 is able to process any sections from hollow sections, tubes, ovals, tringles up to irregular sections. Thanks to sensory measurement of sections and accurate clamping rests, the machine works with an accuracy of +/- 0,2 mm / 0,15°.

Technical data

  • resonator output: 3200 W
  • working range:
  • rectangle – 200 x 150 mm
  • tube – 150 mm
  • in the length of 6000 mm
  • max. thickness of section wall:
  • steel – 6,4 mm; stainless steel – 6 mm;
  • aluminium – 4 mm

Machine

Working range
Axis x 6500 mm
Axis Y 200 mm
Axis Z 150 mm
A1-rotation axis (insert-through casing) n x 360°
A2-rotation axis (rotation and positioning station) n x 360°
Max. travelling speeds
Axis X (+) 100 m/min
Axis X (-) 75 mm/min
Axis Y 40 m/min
Axis Z 40 m/min
Axis A1 720°/sec
Axis A2 720°/sec
Accuracy 1
The smallest programmable travelling 0,01 mm / 0,001°
Position deviation +/- 0,2 mm / 0,015°
Average allowance +/- 0,06 mm / 0,005°

Workpiece

Size of workpiece
max. length of material 2 6000 mm
min. length of tubes, square and rectangular sections 141 mm
length of workpiece 0 – 3000 mm
option 0 – 6000 mm
max. copied diameter 150 mm
min. tube diameter 20 mm
min. edge length of square and rectangle 20 mm
max. wall thickness 6,4 mm
Max. weight of workpiece
SRaw material and finished product 20 kg/m

With respect to processing, feeding with sorting and possibility of clamping of other types of sections than round, square and rectangular shapes, it is necessary to check them individually, what is more, they require additional precautions in the machine concept.

1) according to VDI/DGQ 3441 measured length of 1 m. The attainable result depends on the tube accuracy
2) permitted tolerance according to DIN: + 500 mm

Up